Product Overview
Edge Master Ceramic Combination Knife Sharpening Whetstone 400/1000 Grit
Maintain your knife edge with the Edge Master Ceramic Combination Whetstone.
The 400/1000 grit is ideal for repairing damaged edges and resharpening.
Start with the coarse 400 grit and then flip over to the medium 1000 grit for fine sharpening and removal of burrs.
Always keep the whetstone wet when sharpening and avoid removing the powder build-up as this helps to sharpen the knife.
Key Features:
- Includes two whetstones: coarse 400 grit to repair chipped edges and medium 1000 grit to resharpen dull knives and remove burrs
- Submerge the whetstone in water for approximately five minutes before use
- Mount stone in the rubber base and place on a non-slip surface
- Ensure whetstones remain wet while sharpening
- Avoid removing the powder build-up as it helps sharpen the knife
- Ideal for sharpening straight edge knives at a 15 to 30 degree angle using a constant back and forth motion
- Not suitable for serrated knives or scissors
Construction: Ceramic and plastic
Dimensions: 18.5cm (length) x 6cm (width) x 3.25cm (height)
- Cleaning and care Rinse with water then leave to dry in a well-ventilated area.
- Do not use to sharpen serrated knives or scissors.
- To avoid knife damage, sharpen it by employing light pressure.
- Use the entire surface of the stone, so as to maintain evenness during sharpening.
- Avoid letting the whetstone fall or other similar impacts.
- Keep out of reach of children.
